Robustel M1000 Pro V2 Quick Guide Manuel d'utilisateur télécharger pdf (Page 2)

Robustel GoRugged M1000 Pro V2 Quick Guide

RT_QG_M1000 Pro V2_v.1.0.0 24.01.2014 2 / 6

1.3 Working Mode Switch

There are two working modes available in the gateway, please check carefully:

Mode

Description

Config Mode

When DIP switches to Config Mode, user could use follow functions:

1. Configure gateway via M1000 Pro V2 Configurator ;

2. Upgrade firmware.

Serial port parameters is fixed as 115200, 8, None, 1

Normal Mode

When DIP switches to Normal Mode, user could use follow functions:

1. Automatic GPRS/UMTS connection (no AT commands required);

2. Wakeup by Timing/Periodical/Call/SMS/Serial Data;

3. Transparent data communication or become a Modbus gateway;

4. CSD communication.

5. Remote configuration or firmware updating.

Serial port default parameters: 115200, 8, None, 1

1.4 PIN assignment

PIN assignment for modem’s DB9 female connector

RS232

RS485 (2-wire)

Data+ (A)

RXD ->

TXD <-

GND

Data- (B)

RTS <-

CTS ->

Switch

1 2 3 4 5 6

Pas de commentaire

Robustel M1000 Pro V2 Quick Guide Manuel d'utilisateur Page 2